Elimadent V2 – 6 Strip Warm Center Cool Offset (Scratch&Dent)

6 Strip 18v PDR L.E.D. Cordless 14 inch and 20 inch Light Board.
(3 warm white – 2 outer and 1 center, 3 cool white – 2 outer 1 center)

BATTERIES AND CHARGER SOLD SEPARATE
PWM Dimmer Included
Manuel suction cup and Elim A Dents Spinal-Cord

*WARNING ONLYCOMPATIBLE WITH M18SERIES BATTERIES*

“Patents9109769, 9212793“

* Setup as warm white perfectly centered and cool white off centered. Can change upon request.

This version is powered by OEM 18v lithium ion batteries or off-brand replacements. The board can be rotated and twisted 360 degrees. Comes with 6 L.E.D. strips, 1 warm center 2 warm outer and 1 cool center 2 cool outer. (Cool strips are off centered from warm white unless otherwise specified) 3 switches on base control strips. Each switch has 2 on positions and 1 off. Each on position controls 1 strip of L.E.D. Batteries charge in 15-40 min and last for 3 to 8 +hours depending on how many strips you power and what size battery your using.

*Custom cool/warm white configurations available upon request

New Spinal-Cord Setup

Elim A Dents Patent Pending Spinal Cord setup. These new revolutionary fittings allow you to extend and shorten your cord length without taking the entire assemble apart. Better than that each link has a bolt and nut inside a plastic housing that allows you to set the tension of each link. Ounce Spinal Cord fittings are connected they cannot pop apart without loosening the tension screws. If you prefer that loose broke in feel loosen the screws, if you like to keep that tight like new feeling tighten the screws. If you would like to have part of the links loose so you can maneuver and spin the board freely but have another section tight to support the boards weight well you can do that also.

> 18v powered by Milwaukeelithium ion batteries or off-brand replacements.

> Allows you to use existing chargers and batteries to eliminate carrying multiple different batteries and chargers.

> Easy battery release for swapping out dead batteries

> Completely cordless no exposed wires.

> Versatile 360 degrees of movement with no worries of cord tangles.

> Quick disconnects to easily replace wearable parts like the loc line assembly.

> Up to 9 18v strips with a variety of warm/cool color combination.

> 3 independent switches on base so they don’t get switched by accident when adjusting board and also allow for various led strip combinations.

>Matched acrylic face plate for the perfect fade. Acrylic is secured into place so it wont slide or fall out.

>Built in suction cup with replaceable plunger and pad which saves cost on repairs by only needing to purchase parts instead of entire assembly. Now works with Woods and Ram Twist Cups

>Low profile dimmer on base side to control brightness of L.E.D.

***Warranty covers Parts and Labor for one year on defective products. Does not cover user abuse.***

Milwaukee is a registered trademark property of Milwaukee Electric Tool Corporations which is not affiliated with Elim A Dent LLC.

Makita, LXT, AVT and the Makita logo, Teal color and Black & White color combination are the registered trademarks of Makita which is not affiliated with Elim A Dent LLC.

Milwaukee is a registered trademark property of Milwaukee Electric Tool Corporations which is not affiliated with Elim A Dent LLC.